Petite, yet powerful! This is how the Joyetech eGo 1100mAh is described. This powerful vaping device is made for vapers at all levels. Whether you are a complete beginner to vaping or you are a pro, there is something for both of you in Joyetech eGo One. This is one of the most advanced, but smallest vaporizers on the market today. The product can fit right into your palm and produces thick clouds of vapor for several hours. This is why the product has been causing quite a buzz among the avid vapers around the globe. This article provides an honest review of the Joyetech eGo One 1100mAh kit. The eGo One works with two types of atomizer heads, one for lung inhaling and the other for mouth inhaling. The mod is a 510 threaded with an adjustable airflow valve. You just have to rotate the ring counter-clockwise to increase and clockwise to decrease the airflow. The ring is situated at the base of the atomizer. There are two drip tips (glass and metal with thermal insulation) included in the kit. The product comes in two different sizes … 1100mAh and 2200mAh. If you prefer a conceilable, sleek design that is easy to carry, go with the 1100mAh. Anyone wanting a longer lasting device with the same salient features can definitely opt for the 2200mAh. The eGo One comes with a 1.8ml tank as well as a lithium polymer battery with 1100mAh. With the adjustable airflow feature and sub-ohm atomizer, the Joyetech eGo One is going to definitely revolutionize your vaping experience. The eGo One comes with so many user-friendly features. This is why the product has been reviewed so highly on numerous online forums and discussion boards. The Joyetech eGo One can be charged through a Micro USB port via a wall adapter or a computer. This is done with a USB cable. Hence, the product can work as a pass-through device for vaping and charge at the same time. For the device to be used this way, the battery should contain a small amount of charge. You cannot use the battery quicker than it charges since the battery may shut off during such instances. The best thing is to charge the battery for at least 10-minutes before you decide to use the device this way. The power button should be pressed 5-times in rapid succession for the device to switch on. When the device is on, you only need to hold down the power button in order to activate the atomizer and start vaping. Pressing the power button five times in succession will shut down the device when not in use. Make sure you do this before placing the mod in a purse, bag or in your pocket. When the activation button is held for at least 15-seconds or more the mod will stop firing until you release the button and press it again. There is an indicator LED light that will flash when the battery capacity goes below 3.3V. The power will be shut down under such circumstances. This is a protection feature against short circuits. This feature will help protect the Joyetech eGo One kit against shorted atomizers. This is an in-built protection system to protect the user of the device. The device has an operating voltage of 3.3 to 4.2V. The stainless steel and sturdy construction is a salient feature of the product. The device is 510 threaded with a 1.8ml tank capacity. The battery is 1100mAh with low voltage and short circuit protection features. The minimum resistance is 0.5 ohms. Battery dimension is 58.5mm to 19mm, and the tank dimension is given as 46mm to 19mm. The Joyetech eGo One 1100mAh kit includes one 1100mAh battery, one atomizer tube, one micro USB cable, one metal mouthpiece, one glass mouthpiece, one atomizer base, 2 CL atomizer heads of 0.5-1.0 ohms, one 1A wall adapter and the manual with the warranty card. There are so many avid smokers who are speaking very highly about this device. This is why it has become so popular on the market. You can get it for below $50 from many online stores & vape shop.

Leave a Reply

Your email address will not be published. Required fields are marked *