The Innokin T18-X is the newest member of the Endura family. It’s a classic 18mm pen-style device with a separate tank, 510 connector, top-fill, and changeable coils. It is simple to use, fill, and change coils, making it an excellent beginner kit and a far superior alternative to throwaway pods.

A Little About The Manufacturer

Since its inception in 2011, Innokin has been creating and manufacturing high-powered mods, tanks, and pod systems. They already have a number of successful products, including the Endura T18. Durability and simplicity of use are two things that their equipment symbolize. You don’t need to be a rocket scientist to figure out how to use their equipment.

Innokin Endura T18-X Specs

  • Size: 18x135mm (2ml tank) / 18x143mm (2.5ml tank)
  • Output: 13.5W (1.5ohm coil) / 12W (1.7ohm coil)
  • Battery: 1000mAh
  • Display: LED indicator
  • Resistance range: 1.3-3.5ohm
  • USB Type C port – 0.5A charge rate
  • Capacity: 2.5ml (Standard) / 2ml (TPD)
  • Top refill
  • Coils: T18 range
  • Pass through charging

Design and Build Quality

The Innokin Endura T18-X’s main selling feature is unquestionably its ease of usage. It’s a perfect beginner kit for people who are new to the world of vaping or even seasoned vapers who want a straightforward and basic kit because it’s simple to set up and requires minimum maintenance. The device is built of stainless steel, which makes it long-lasting. It also has a sleek design that keeps it from being overly bulky or cumbersome in your pocket.

The device has a straightforward single-button design with no modifications. As the tank has a fixed base airflow design with a matching slot, the top of the device has an airflow slot.

Battery Capacity

The battery capacity remains the same at 1000mAh, however, this time you have a USB Type C connector that charges at a 0.5A charging rate. The output differs somewhat from that of the original Endura T18. The original version had a 14W output, however, the X version has a 13.5W output for the 1.5ohm coil or a 12W output for the 1.7ohm coil.

Tank Description

The tank is a great fit for the mod, and the glass is caged, which should protect it from most knocks, drops, and bumps. However, if you happen to shatter it, you’re out of luck since there’s no substitute glass because it’s fixed within. The tank is simply removed by unscrewing counter-clockwise, and Innokin has limited the number of components to a minimum.

The 510 thread is essentially part of the coil, and the base just keeps everything together. The airflow is also routed directly into the coil via the slots in the mod’s and tank’s bases. The tank employs a top-fill technique, which works well on this tank because there is enough room and the coil is high enough to prevent messy spills.

Performance 

With any coil, the Endura T18-X Kit offers a fantastic vape. The battery life is adequate and may last the bulk of the day, depending on how you vape.

Packaging and Availability

Innokin has committed to making all of its packaging eco-friendly, so there will be nothing that isn’t biodegradable or recyclable, and even the printing is eco-friendly with no plastic coating. The outer sleeve is simple, with information on the back. Once removed, you’ll find a flip-top box with the beginning instructions printed on the inner lid and the kit all on one layer, with the extras sectioned off to one side.

What’s In The Kit?

  • 1 x Innokin Endura T18-X Mod
  • 1 x Innokin Prism T18E Tank
  • 1 x Innokin Prism T18E Coil (Pre-Installed) – 1.7Ω 
  • 1 x Innokin Prism T18E Coil – 1.5Ω 
  • 1 x Replacement Drip Tip
  • 1 x Replacement O-Ring
  • 1 x USB Type-C Cable
  • 1 x User Manual

The kit is available for £19.99 on https://vapegreen.co.uk/

Leave a Reply

Your email address will not be published. Required fields are marked *